| Size |
Height= {83", 61 1/2",
28"} Width {47 1/4", 42", 36"} Depth {17 3/4"} |
| Cabinet |
Cold-rolled steel, welded steel construction, over
100 spot welds.
- Base: 16 gauge
- Back Panel: 18 gauge
- End Panels: 18 gauge
- Top: 18 gauge
|
| Door |
- Horizontal tambour, extruded PVC slats (passes UL 94V0 flame
retardation specification)
- Doors concealed within inside end panels, so media is protected
- Easy sideways motion to open or close; no bending or stooping.
Door action is quiet and smooth.
- Patented gear action. No moving parts except for passive gear
wheelswhich keep slats perfectly aligned.
- Door end slats of steel to ensure security when locked.
|
| Standard
Shelf |
16 gauge steel, 1" thick, 200 pound test
weight. Four filing dividers and backstop for each shelf (48"W models; three filing
dividers per 42"/36" W models); dividers adjust on 2 1/2" horizontal
increments; backstop has three adjustments front to back to allow for different file
folder length. Use for color-coded end tab files or other shelf filing systems. 83" H
cabinet fits seven shelves of color coded files. Built-in bottom shelf. |
| Reference
Shelf |
16 gauge steel, 1 " thick, reinforced with 18
gauge side to side hat section. 200 pound test weight. 10 3/4"D x 17 3/4W 18 gauge
steel pull-out supports 20 pounds. Teflon strips cover steel supports to ensure quiet
movement. |
| Rail |
Welded, 16 gauge steel. For suspended pocket end tab
filing; accepts undershelf type suspended pockets. 83"H cabinet fits seven rails with
suspended pockets; 62"H cabinet fits five rails with suspended pockets. |
| Rail
Roll-Out Frame |
For storage of top tab files in hanging file
folders. Heavy-duty, ball bearing 200 pound test weight Accuride suspensions for smooth
drawer movement with heavy loads. 18 gauge welded steel frame. Available with different
cross-members to accomodate front to back or side to side filing. |
| Roll Out
Drawer |
For storage of media and/or office suplies. Same as
above except 22 gauge bottom. Comes with three dividers adjustable in 1/4" horizontal
increments. |
| Levelers |
Four adjustable levelers on each cabinet. Rear
levelers internally adjustable. |
| Locks |
Standard, fixed in 18 gauge steel end frame of door,
two keys. Master key available. |
| Component
Configuration |
All interior components are interchangeable, and fit
in adjustment slots on 1" vertical increments on 20 gauge steel inside end panels. |
| Shipping
Configuration |
Cabinets feature all-welded construction and are
shipped assembled except for interior components. |
| Finish |
Smooth baked enamel finish. Cabinet in choice of
five colors: interior components and inside end panels in Graphite. |
