|
Step 1) |
Choose a
cabinet size. (see step 1) "In To Custom
Configure a Cabinet" |
|
Step 2) |
Choose
the drawers you want to fill the cabinet. Note that the total
height of the drawers must equal the total height of the
cabinet. Here's how to do it: |
|
Step 2A) |
Say the
cabinet you pick is Model Number 240-680. The "680" in the cabinet model
number is the total height sum that you need to fill with your selection
of drawers.
|
|
Step 2B) |
For
instance: You may just want all 240-40 drawers. The "40" in the drawer
model number is the key. Watck this: 17 drawers multiplied by "40" equals
"680" (17 x 40 = 680) Simple enough? You can put seventeen 240-40 drawers
into a 240-680 cabinet because the drawers used to fill the cabinet added
up to the cabinet height. You can use different sized drawers, lets say
six "100" drawers plus one "80' drawer to reach "680". Any combination of
drawers is fine as long as they add up to the cabinets height. Easy Right?
Note: There's a size
chart for all available drawers in (Step 2) of "To
Custom configure a Cabinet"
|
|
Step 3) |
Locks
are easy. Every cabinet is outfitted with a high quality lock. For
more information than you will probably ever need on locks, refer to (Step
3) in "To Custom Configure a Cabinet" |
|
Step 4) |
Choose
drawer dividers, if you wish.
There's a dividers chart in (Step 4) of "To
Custom Configure a Cabinet" |
|
Step 5) |
Pick a
color. see (Step 5) of "To Custom Configure a
Cabinet" Keep in mind that the drawers can be two different
colors. |
